M.U.G.E.N Documentation:Background Documentation

Background / Stage Documentation

M.U.G.E.N, (c) Elecbyte 1999-2010

Documentation for version 1.1 (2010)

Updated 28 July 2010

Overview

A background in M.U.G.E.N consists of one or more background elements, and zero or more background controllers. These are combined with stage settings to produce the appearance and functionality of a stage for use in M.U.G.E.N.

The stage settings control general parameters such as the size of the stage, movement of the camera, starting position of characters and camera in relation to the stage, shadow intensity, floor reflections, etc. Most fighting games maintain consistent values of these background parameters across their constituent stages, especially in regards to stage size and camera movement.

A background element is an individual unit of graphical data that is displayed on screen. All the visible parts of the stage are formed out of background elements. Each background element has individual settings for its sprite data, transparency, location, tiling, scroll speed with respect to the camera, and animation (if applicable). "Parallaxing" elements add a raster effect when scrolling the camera. Background elements may be of any size, although in practice, backgrounds are usually pieced together from several moderately-sized elements.

A background controller will perform additional manipulations on a background element, such as change its position or velocity, make it invisible or invisible, etc. Applications of background controllers include making characters stroll back and forth in the background, having debris fly across the screen, or creating changes in the background at set times (such entering a cave when the characters are fighting on a ship). In general, background controllers may allow you to create more advanced effects for a stage or optimize certain animations to reduce memory consumption, although many stages will do quite well without any controllers at all.

When creating a stage, you must assure that the visible area on the screen is "covered" by background elements at all times. Leaving holes in the background will cause a hall-of-mirrors effect in that location. Enabling the debugbg parameter will fill all holes with a bright shade of magenta, which should assist you in locating and fixing them.

Besides the obvious use in stages, backgrounds objects are used in M.U.G.E.N for the backgrounds of all system screens such as the title screen and the character select screen, as well as for use in storyboards. These types of backgrounds are referred to as "system backgrounds" and "storyboard backgrounds" respectively. Background objects used for stages are called "stage backgrounds". Besides their intended use, there is essentially no difference between the different types of backgrounds. This document covers stage settings as well as the background object format.

Description of stage settings

Stage settings define the background's relationship with the stage. The stage settings must be in the same stage file as the background. There are several groups that make up the settings. They are:

(all parameters are required unless specifically marked as "optional")

Info Group

name = stage_name

This parameter sets the name of the stage. The parameter must be enclosed in double-quotes.

displayname = display_name

This parameter sets the name to display in the stage select list. The parameter must be enclosed in double-quotes. If omitted, defaults to stage_name.

versiondate = version

This parameter sets the version of the stage. The formats accepted are either a date (MM,DD,YYYY) or a x.xx version number, e.g. 1.23. This parameter is for informational purposes and is currently not used by the engine.

mugenversion = mugen_version

This parameter sets the target version number of M.U.G.E.N that the stage is designed for. Valid values are 2002,02,14, 1.0 or 1.1. Defaults to 2002,02,14.

A version number of 2002,02,14 restricts camera movement to whole units of the stage coordinate space, whereas 1.0 and higher allows the camera position to assume fractional values.

author = author_name

This parameter sets the name of the author of the stage. The parameter must be enclosed in double-quotes. This parameter is for informational purposes and is currently not used by the engine.

Camera Group

startx = pos_x

Sets the camera's starting x-position. Should be set to 0.

starty = pos_y

Sets the camera's starting y-position. Should be set to 0.

boundleft = min_x

This is the minimum x-value that the camera can move to. It must be negative. Adjust this value to limit how far left the camera can scroll.

boundright = max_x

This is the maximum x-value that the camera can move to. It must be positive. Adjust this value to limit how far right the camera can scroll.

boundhigh = min_y

Controls the minimum y-value that the camera can move to. It must be negative. Adjust this value to limit how far up the camera can scroll.

boundlow = max_y

Controls the maximum y-value that the camera can move to. It must always be set to 0.

tension = h_dist

This is the horizontal distance a player can get from the left and right edges before the camera starts to follow.

tensionhigh = top_dist ; (Version 1.1 and higher)

This is the vertical distance a player can get from the top edge before the camera starts to follow. The use of the tensionhigh and tensionlow parameters activates a method of vertical scrolling based on edge tension introduced in Version 1.1. If tensionhigh and tensionlow are specified, verticalfollow and floortension will be ignored.

tensionlow = bottom_dist ; (Version 1.1 and higher)

This is the vertical distance a player can get from the bottom edge before the camera starts to follow.

verticalfollow = closeness

This value affects the vertical movement of the camera to follow the highest player. It should be set between 0 and 1. A value of 0 means the camera does not move up at all. A higher value makes the camera track the higher player closer. A value of 1 makes the camera track the player as close as possible. This parameter is ignored if tensionhigh and tensionlow are used.

floortension = v_dist

This is the minimum vertical distance the highest player has to be from the floor (given as a positive value), before the camera starts to move up to follow him. This parameter is used only with the verticalfollow camera scrolling mode. This parameter is ignored if tensionhigh and tensionlow are used.

overdrawhigh = top_pixels ; (Version 1.0 and higher)

See below.

overdrawlow = bottom_pixels ; (Version 1.0 and higher)

Number of pixels beyond the top and bottom of the screen that may be drawn. Overdraw specifies the how much can be seen during an EnvShake. Overdraw pixels will also be used when the screen aspect is taller than the stage aspect.

cuthigh = top_pixels ; (Version 1.0 and higher)

See below.

cutlow = bottom_pixels ; (Version 1.0 and higher)

Number of pixels into the top and bottom of the screen that may be cut from drawing when the screen aspect is shorter than the stage aspect. These parameters suggest a guideline, and the actual number of pixels cut depends on the difference in aspect. If cuthigh and cutlow are omitted, the engine will attempt to guess a reasonable set of values.

startzoom = start_zoom_scale ; (Version 1.1 and higher)

This specifies the initial scale factor for the stage. The effect of this parameter is most visible if there are no characters that affect the camera. Defaults to 1.

zoomout = zoom_out_scale ; (Version 1.1 and higher)

This specifies the scale factor for the stage when the camera is fully zoomed out. Note that a smaller number allows the camera to zoom out more, e.g. zoomout = .5 specifies that the camera can zoom outwards by a factor of 2. Defaults to 1.

zoomin = zoom_in_scale ; (Version 1.1 and higher)

This specifies the scale factor for the stage when the camera is fully zoomed in. Defaults to 1.

PlayerInfo Group

p1startx = x_start

Sets the starting x-position for Player 1.

p1starty = y_start

Sets the starting y-position for Player 1.

p2startx = x_start

Sets the starting x-position for Player 2.

p2starty = y_start

Sets the starting y-position for Player 2.

p1facing = facing_flag

Controls which way Player 1 faces at the start. Set to 1 to face right, or -1 to face left.

p2facing = facing_flag

Controls which way Player 2 faces at the start. Set to 1 to face right, or -1 to face left.

leftbound = x_min

Sets the minimum allowable x-position for all players.

rightbound = x_max

Sets the maximum allowable x-position for all players.

Bound Group

screenleft = min_dist_left

Minimum allowable distance between players and the left edge of the screen. Must be positive.

screenright = min_dist_right

Minimum allowable distance between players and the right edge of the screen. Must be positive.

StageInfo Group

zoffset = v_dist

v_dist is the vertical distance of the ground level from the top of the screen, given in pixels. The zoffset parameter is inappropriately named, but has been left unchanged for compatibility purposes.

zoffsetlink = elem_ID

If this parameter is specified, it links the zoffset value to the y-position of a background element with the specified ID number. For example, you can link the value to a dummy element (see Other background element types) with a sin.y parameter to make the characters bob up and down in a sinusoidal fashion.

autoturn = turn_flag

Leave this parameter to 1 to make characters automatically turn to face each other. Setting this to another value will cause undesirable behavior.

resetBG = reset_flag

If set to 1, backgrounds will be reset between rounds. If set to 0, backgrounds will continue playing.

localcoord = width, height

Dimensions of the coordinate space of the stage. Defaults to 320, 240 if omitted.

xscale = xscale

Horizontal scaling factor of offsets, velocities, sprites and animations.

yscale = yscale

Vertical scaling factor of offsets, velocities, sprites and animations.

Shadow Group

intensity = darkness_val ;(optional) (int)

This controls how dark the shadow is. Valid values range from 0 (lightest) to 256 (darkest). Defaults to 128 if omitted.

color = r,g,b ;(optional) (deprecated)

This parameter is no longer supported as of M.U.G.E.N 1.1 and will be ignored.

yscale = scale_y ;(optional) (float)

This is the vertical scale factor of the shadow. Use a larger scale_y to make the shadow longer. You can use a negative scale_y to make the shadow fall on the other side of the players. Defaults to 0.4 if omitted.

fade.range = top_y, bot_y ;(optional) (int, int)

This parameter lets you set the range over which the shadow is visible. It is used to create an effect of the shadow fading as the player gets farther away from the ground. The first value is the high level, and the second is the middle level. Both represent y-coordinates of the player. A shadow is invisible if the player is above the high level, and fully visible if below the middle level. The shadow is faded in between the two levels. If omitted, defaults to no effect (shadow is always fully visible). Take note that y-coordinate values are negative, and TOP_Y should be less than BOT_Y.

xshear = shear ;(optional) (float)

Specifies the amount of horizontal shearing to apply to the shadow. A positive value shears the shadow to the left of the screen. Defaults to 0.

Reflection Group

reflect = reflect_flag ;(optional)

Set reflect to 1 to enable reflection shadows, 0 to disable them. Reflection shadows create a "shiny floor" effect. Defaults to 0 if omitted.

Music Group

bgmusic = bgm_filename ;(optional)

bgm_filename is the name of the music file to play in the stage. Music files are usually put in the sound/ directory. Leaving bgm_filename blank will result in no music being played. If the music file does not exist, no music will be played. To play CD audio, put the track number followed by ".da". Using a track number of 0 will play a random audio track. For example, to play track 3 from a music CD, use bgmusic = 3.da. If omitted, defaults to no music.

bgvolume = volume_offset ;(optional)

This parameter adjusts the volume of the BGM being played. 0 is normal, negative for softer, and positive for louder (only for mp3, mods and CDA). Valid values are from -255 to 255. If omitted, defaults to 0.

Description of background elements

A background is made up of one [BGDef] group and one or more [BG] groups. The [BG] groups are called background elements.

Exactly one BGDef group is required in the stage's DEF file. An example of the format:

[BGDef]
spr = my_stage.sff
debugbg = 0

Replace my_stage.sff with the name of the SFF file containing your stage's sprite data. The SFF file should be placed in the same directory as the stage DEF (i.e. stages/). If debugbg is set to 1, the screen is cleared to magenta before the stage is drawn. This makes "holes" in the background more apparent. To improve runtime speed, set debugbg = 0 before releasing a stage for distribution.

Once the BGDef definition is created, everything below it in the DEF file is considered to belong in the BGDef section. In the BGDef section, you should specify one or more background elements. Background elements are drawn in the order they appear in the DEF file (with later elements drawn over earlier elements), so the rearmost elements should be defined first.

Format of background elements

An example for specifying a static background element is as follows.

[BG my_element_name]
type = normal
spriteno = 0,0
start = 0,0
delta = .5, .5
mask = 0

This example displays sprite 0,0 from the background's SFF file at an initial position of 0,0. For each unit of camera movement, the sprite will move .5 stage units.

Every background element is defined by a group starting with a header [BG my_element_name]. my_element_name should be replaced with a distinct and descriptive name, as the group header is what will be displayed in error messages.

Parameters are to be specified in the lines following the group header.

Static background element parameters

type = normal ; (required) (string)

This specifies that this background element is a static sprite.

spriteno = groupno, imageno ; (required) (int, int)

groupno, imageno specifies the sprite in the SFF to display for this background element.

layerno = layer ; (optional) (int)

If layer is 0, the background element will be drawn behind the characters. If layer is 1, the element will be drawn in front of the characters. Within each layer, background elements are drawn back-to-front in the order they appear in the DEF file. Defaults to 0.

start = x,y ; (optional) (float, float)

Specifies the background element's starting position with respect to the top center of the screen. Positive x values go right; positive y values go down. The values are given in stage units, which correspond to pixel units in typical use. Defaults to 0,0.

delta = dx,dy ; (optional) (float, float)

Specifies how many pixels the background element should scroll for each pixel of camera movement in the horizontal and vertical directions, respectively. Setting delta=1,1 will cause the background element to move at the same speed as the camera. 1,1 is an appropriate value for the ground under the characters' feet. For elements off in the distance, use smaller values of delta to create the illusion of depth. Similarly, elements in the foreground (layerno = 1) should usually be given deltas larger than 1. Defaults to 1,1.

mask = mask ; (optional) (boolean)

If mask is set to 1, color 0 of the sprite will not be drawn. This is used in drawing objects which are not rectangular in shape. For performance reasons, mask should be set to 0 when not needed. This parameter is ignored for RGB sprites. Defaults to 0 normally. For historical reasons, mask will default to 1 if the trans parameter is set to add or sub.

tile = x_tile,y_tile ; (optional) (int, int)

Specifies if the background element is to be repeated ("tiled") in the horizontal and/or vertical directions, respectively. A value of 0 specifies no tiling, a value of 1 specifies infinite tiling, and any value greater than 1 will cause the element to tile that number of times. If this line is omitted, no tiling will be performed.

tilespacing = x_spacing,y_spacing ; (optional) (int, int)

If tiling is enabled, this line specifies the space to put between separate instances of the tile in the horizontal and vertical directions, respectively. There is no effect if tiling is not enabled. tilespacing defaults to 0,0.

Animated background elements

The format for specifying an animated background element is almost exactly the same as for a normal background element. The differences are described below.

[BG my_animated_element]
type = anim
actionno = 55

All other parameters other than spriteno are the same as for static background elements.

First, for the element to animate, a type of anim must be specified. Second, an "action number" (actionno) must be specified. This replaces the spriteno parameter that would be used for a normal background element. The value of actionno must be for an animation that is defined in the DEF file. In this example, since actionno is 55, Action 55 must be defined in a manner similar to the following:

[Begin Action 55]
0,0,0,0,5
0,1,0,0,5

The format is the same as specifying animations in the AIR file, so details will be omitted here. The Action definition can be placed anywhere below the original [BGDef] group. Typical strategies are either to define the action immediately after the element it belongs to, or else to collect all the stage's actions together at the beginning or end of the [BGDef] group.

Note that each sprite you specify in the animation has its own axis (specified in the SFF file). During animation playback, the axis of each sprite will be lined up to correspond with the axis of the background element itself.

The effect of the tilespacing parameter is different for anim-type elements compared to normal-type elements. For a normal element, the x-value of this parameter specifies the horizontal distance between the right edge of the first tile and the left edge of the second tile. In the case of an anim element, the x-value specifies the horizontal distance between the left edge of the first tile and the left edge of the second tile. This applies similarly for the y-value. The reason for the difference is because the size of an anim is not necessarily constant. tilespacing is required for anim-type elements that use the tile parameter.

Animated elements always have mask = 1 and cannot be set to non-masked.

Parallaxing background elements

Parallaxing background elements give the illusion of depth for elements that appear to face upwards or downwards. Parallaxing background elements may consist of a single sprite specified by the spriteno parameter. In Version 1.1 and higher, parallax elements may be animated by specifying actionno like in ordinary animated background elements. Animated parallax may not be used with the xscale parameter.

An example of the format is as follows:

[BG my_parallax_element]
type = parallax
spriteno = 10, 0
width = 300, 600
scalestart = 1,1
scaledelta = 0,.001

Another example:

[BG my_parallax_element]
type = parallax
spriteno = 10, 0
xscale = 1,1.5
yscalestart = 100 ;Deprecated!
yscaledelta = 1.2 ;Deprecated!

Parameter descriptions follow:

width = top_width, bottom_width ; (int, int)

top_width and bottom_width respectively specify the top and bottom widths of a trapezoid that has the same height as the sprite used. The sprite will be distorted to match the shape and size of the trapezoid. The ratio of top_width to bottom_width affects the amount of shearing as the camera moves horizontally. Use width if the sprite is not preprocessed for perspective distortion. For historical reasons, the x-axis specified in the SFF is ignored. The horizontal center of the sprite is used as the x-axis instead.

xscale = top_xscale, bottom_xscale ; (float, float) (deprecated)

top_xscale and bottom_xscale respectively scale the horizontal delta of the background element's top and bottom edge to create a horizontal shearing effect. For example, delta = .75, .75 amd xscale = 1, 2 specifies the top of the sprite would move at .75 * 1 = .75 stage units per camera unit, and the bottom would move at .75 * 2 = 1.5 stage units per camera unit. This example assumes the sprite axis is at the top of the sprite.

Either xscale or width is required, but not both at the same time. Use xscale if the sprite has already been preprocessed for perspective distortion. Hardware accelerated rendering will have visual artifacts at extreme shear angles.

Animated parallax may not be used when xscale is used.

yscalestart = yscalestart ; (float) (deprecated)

This deprecated parameter controls the change in vertical scale of the element as the camera moves vertically. Its functionality is replaced by the general-purpose scalestart and scaledelta advanced parameters.

yscalestart is the inverse of the vertical scale of the sprite when the camera is at ground level, represented in percentage. For example, a value of 100 corresponds to a scale factor of 1, and 50 corresponds to a scale factor of 2. The value defaults to 100.

yscaledelta = yscaledelta ; (float) (deprecated)

Specifies the amount to add from the inverted scale factor for every camera unit the camera moves down, represented in percentage. The final scale factor is calculated using the following formula:

scale = 1 / (yscalestart/100 + yscaledelta/100 * camera_y)

In the example above, if the camera moves up by one unit, the scale factor will be 1 / (1.00 + .012 * -1) = 1.012, and if it moves up another unit, the scale will be 1 / (1.00 + .012 * -2) = 1.025 and so on.

The unintuitive behavior for the yscalestart and yscaledelta parameters is the reason for deprecating these parameters in favor of the scalestart and scaledelta parameters.

Notes:

Other parameters for static elements are also valid for parallax elements, with the exception of tilespacing. Additionally, y_tile is ignored and forced to be 0.

The result of specifying an angle in an animated parallax element is undefined.

The software renderer does not support animated parallax.

Advanced Parameters

These optional parameters can be added to any background element.

trans = trans ; (optional) (string)

Specifies the type of transparency blending to perform on the sprite. Transparency modes are default, none, add, sub. Respectivelty, these specify default behavior, no transparency, color addition and color subtraction. default and none both cause non-animated elements to be drawn without any tranparency blending. For animated background elements, default will use anim-specific transparency while other values of trans will override the transparency flags in the anim. If add is specified, the alpha parameter may be used to control the blending. Defaults to default.

Note: If mugenversion is less than 1.0, none will behave the same as default for animated elements.

alpha = src_alpha,dst_alpha ; (optional) (int, int)

Specifies the source and destination blend contributions when trans = add. Acceptable values are from 0 to 256. Defaults to 256,256.

id = id_number ; (int)

This specifies an ID number for the background element. Multiple elements can share the same ID number. The purpose of the ID number is to allow background controllers to specify which elements they are operating on. Defaults to 0.

positionlink = link_flag ; (boolean)

Set positionlink to 1 to lock this element's position to the position of the element immediately preceding it in the DEF file. If set to 1, the values of the start parameter for the current element are treated as an offset from the previous element's position. The delta parameter will have no effect in this case. This is useful for getting large groups of elements to move in unison; if you edit the start and delta values of the first element in the positionlink chain, the effects will be seen throughout all elements the chain. Defaults to 0.

maskwindow = x1,y1,x2,y2 ; (int, int, int, int) (Version 1.1 and higher)

Specifies a masking window for the background element. A masking window is conceptually a rectangular box on the screen in which the sprite is contained. Any part of the sprite that lies outside of the box will not be drawn. x1,y1 specifies the coordinates of the top-left corner of the window, and x2,y2 specifies the coordinates of the bottom-right corner of the window. These coordinates are relative to the stage origin (top-middle of screen). These coordinates are "endpoint exclusive", i.e. the pixels along the bottom and right edges of the window will not be drawn. If omitted, window masking will not performed.

window = x1,y1,x2,y2 ; (int, int, int, int) (deprecated)

This deprecated parameter is included for compatibility and the use of it is not guaranteed to work correctly under all cases of zooming. It specifies a masking window with coordinates relative to the top-right corner of the screen. The coordinates are endpoint inclusive.

windowdelta = window_dx,window_dy ; (float, float)

Specifies the movement delta of the masking window. It works similarly to the delta parameter for the background element itself. Defaults to 0,0.

velocity = vel_x, vel_y ; (float, float)

Specifies initial x- and y-velocities for the background element (these default to 0). This functionality is also subsumed by the VelSet background controller.

scalestart = scale_x, scale_y ; (float, float)

Starting scale. Defaults to 1,1.

scaledelta = scale_dx, scale_dy ; (float, float)

Similar to the delta parameter, this is the amount to change the scale of the element for each unit of camera movement. Defaults to 0,0.

zoomdelta = dzoom ; (float)

Specifies the amount that the camera zoom affects the scale of the element. A value of 0 is means the element will not change size during zoom, and a value of 1 will scale the element by the same factor of camera zoom. Defaults to 1.

sin.x = amplitude, period, phase ; (float, float, float)

Specifies sinusoidal movement for the element in the x-direction. The first parameter is the amplitude, the second parameter is the period of the motion in game ticks, and the third parameter specifies the initial phase shift of the sinusoidal motion (defaults to 0, i.e., the element will start in the exact middle of its sinusoidal range). This parameter is basically superseded by the SinX background controller.

sin.y = amplitude, period, phase ; (float, float, float)

Works the same as the sin.x parameter, but in the y-direction.

Other background element types

Besides normal, anim and parallax background types, there is also a dummy type. As its name implies, a dummy-type background has no associated graphics. A dummy element's position is affected just like any other element type. A dummy element with an ID parameter may serve as a placeholder for the effect of the zoffsetlink parameter in the StageInfo group.

Background controllers

Background controllers operate on an internal timer that starts at 0 when the round starts, and increases by 1 for every game tick. When the timer reaches the controller's start time, then the controller becomes active. When the timer reaches the controller's end time, then the controller deactivates. If a positive looptime is specified for the controller, then the controller's internal timer will reset to 0 when the looptime is reached.

Background controllers must be grouped under a parent BGCtrlDef. You can use multiple BGCtrlDefs to separate the controllers into several groups. Each block of BGCtrlDef and background controllers may be placed anywhere within the [BGDef] section of the DEF file. The general format for these blocks is as follows.

[BGCtrlDef my_controller_name]
looptime = GLOBAL_LOOPTIME
ctrlID = DEFAULTID_1, DEFAULTID_2, ...

[BGCtrl my_controller_1]
type = CONTROLLER_TYPE
time = START_TIME, END_TIME, LOOPTIME
ctrlID = ID_1, ID_2, ...
(controller-specific parameters here)

[BGCtrl my_controller_2]
(etc.)

GLOBAL_LOOPTIME specifies the number of ticks after which the BGCtrlDef should reset its internal timer, as well as the internal timers of all BGCtrls it contains. To disable the looptime, set it to -1 or omit the parameter.

DEFAULTID_1, DEFAULTID_2, etc., specify the IDs of background elements to be affected by any BGCtrl that doesn't specify its own list of ctrlIDs. You can list up to 10 ID numbers for this parameter. If the line is omitted, then the default will be to affect all background elements.

START_TIME, END_TIME, and LOOPTIME are the times at which the background controller should start acting, stop acting, and reset its internal timer, respectively. If LOOPTIME is omitted or set to -1, then the background controller will not reset its own timer. (Its timer can still be reset by its parent BGCtrlDef if a GLOBAL_LOOPTIME is specified.) The background controller will be continuously active between START_TIME and END_TIME. START_TIME is required, but if END_TIME is omitted then it will default to the same value as START_TIME (so the controller will be active for 1 tick only).

ID_1, ID_2, etc., specify the IDs of background elements for this controller to act on. This list, if specified, overrides the default list specified in the BGCtrlDef. The maximum number of IDs specifiable is 10.

Below is the list of BGCtrl types and their associated parameters.

• null

  As the name implies, this controller does nothing. It is useful mainly for debugging, when you want to quickly disable a controller without commenting the whole thing out. Simply change the type to null and comment out the old type. This controller has no additional parameters.

• Visible

  value = visible_flag

  Sets the visibility status of the elements.

  While active, this controller sets the affected background elements to be invisible (0) or visible (1). Time will still pass for invisible elements (meaning, in the case of animated elements, that the animation will continue to progress even though it can't be seen).

• Enabled

  value = enabled_flag

  Sets the enabled status of the elements.

  This controller either disables (0) or enables (1) the affected background elements. When an element is disabled, it is invisible and time does not pass for it (so, in the case of animated elements, any animation is paused when it's disabled).

• VelSet

  x = vel_x

  Sets the x-velocity of the elements.

  y = vel_y

  Sets the y-velocity of the elements.

  This controller will set the x/y velocity of the affected background elements to the specified values. Velocities are measured in pixels per game tick. You can specify either or both of the x and y parameters. If either is omitted, the element's velocity in that direction will not change.

• VelAdd

  x = vel_incr_x

  Changes the x-velocity of the elements by vel_incr_x.

  y = vel_incr_y

  Changes the y-velocity of the elements by vel_incr_y.

  This controller will add the specified values to the x/y velocity of the affected background elements. You can specify either or both of the x and y parameters. If either is omitted, the element's velocity in that direction will not change.

• PosSet

  x = pos_x

  Sets the x-position of the elements.

  y = pos_y

  Sets the y-position of the elements.

  This controller will set the x/y coordinate of the affected background elements to the specified values. You can specify either or both of the x and y parameters. If either is omitted, the element's coordinate on that axis will not change.

• PosAdd

  x = x_displacement

  Displaces the x-coordinate of the elements.

  y = y_displacement

  Displaces the y-coordinate of the elements.

  This controller will displace the x/y coordinate of the affected background elements by the specified values. You can specify either or both of the x and y parameters. If either is omitted, the element's coordinate on that axis will not change.

• Anim

  value = action_no

  Changes the animation displayed by the affected elements to the specified animation number.

• SinX

  value = amplitude, period, offset

  Changes the amplitude, period, and phase offset for the affected elements' sinusoidal motions in the x-direction. These values have the same effect as they do for the sin.x background element parameters.

• SinY

  value = amplitude, period, offset

  Changes the amplitude, period, and phase offset for the affected elements' sinusoidal motions in the y-direction. These values have the same effect as they do for the sin.y background element parameters.

Simple Example

Suppose we want to make a person walk back and forth from (-300,0) to (300,0), right behind the main characters. We'll use background controllers to accomplish this task.

First, define the walking animations. Say that the character's walking sprites are 10,0 through 10,3 and that they face to the right.

; Walk right
[Begin Action 10]
10,0,0,0,6
10,1,0,0,6
10,2,0,0,6
10,3,0,0,6

; Walk left
[Begin Action 11]
10,0,0,0,6,H
10,1,0,0,6,H
10,2,0,0,6,H
10,3,0,0,6,H

Now start the character off at the far left edge of his range.

[BGDef]
(...)

[BG Peregrinator]
type = anim
actionno = 10
id = 10
start = -300, 0
delta = 1,1

Let's give Peregrinator a comfortable ambling speed of 2 pixels per tick. The one-way distance for his walk is 600 pixels, which will take 300 ticks. In total, it'll take him 600 ticks to make the round trip. Using this knowledge, set up the background controllers appropriately: since the entire situation repeats every 600 ticks, we can set the global looptime to 600.

[BGCtrlDef Peregrinator]
; reset the whole deal every 600 ticks.
looptime = 600
ctrlID = 10

; Set velocity of 2 pixels/sec rightward at time 0.
[BGCtrl Walk Right]
type = VelSet
time = 0
x = 2

; Set velocity of 2 pixels/sec leftward at time 300.
[BGCtrl Walk Left]
type = VelSet
time = 300
x = -2

And that's it! You can make the walk look better by having Peregrinator slow down and display a turning animation at each end of his walk. This would entail use of the VelAdd and Anim controllers. If you want Peregrinator to stop and start at regular intervals as he goes from one end to the other, you could create more VelSet and Anim controllers with their own individual looptimes (to get the behavior to repeat at regular intervals).